Tetra pond Crystal water rapidly clears dirty pond water caused by suspended particles resulting in unsightly murky water. It works by causing the particles to bind together and sink to the bottom of the pond or allow it to be removed via a filter. Its is good practice to treat with Tetra Pond Sediment Minus after use to remove any build up of sludge.
Treatment instructions goes as followed,
- Calculate the volume of the pond using the following, length x width x depth x 1000 gives you the volume in litres (measured in meter) for gallons x 4.45.
- Add 50ml for every 1,000 litres or 224 gallons in to a bucket of pond water and stir.
- Distribute the evenly around the surface of the pond
Important, not suitable for use in very soft water (carbonate hardness below 2°dH). If soft water conditions are likely (e.g. in soft water regions, following periods of heavy rainfall, use of rainwater in pond etc), please check carbonate hardness before use.
Tetra Pond Crystal Water 250ml treats up to a 5,000 litre or 1,123 gallon pond.